In radio communication, used in radio and television broadcasting, cell phones, two-way radios, wireless networking, and satellite communication, among numerous other uses, radio waves are used to carry information across space from a transmitter to a receiver, by modulating the radio signal (impressing an information signal on the radio wave by varying some aspect of the wave) in the transmitter. In radar, used to locate and track objects like aircraft, ships, spacecraft and missiles, a beam of radio waves emitted by a radar transmitter reflects off the target object, and the reflected waves reveal the object's location to a receiver that is typically colocated with the transmitter. In radio navigation systems such as GPS and VOR, a mobile navigation instrument receives radio signals from multiple navigational radio beacons whose position is known, and by precisely measuring the arrival time of the radio waves the receiver can calculate its position on Earth. In wireless radio remote control devices like drones, garage door openers, and keyless entry systems, radio signals transmitted from a controller device control the actions of a remote device. (Full article...)
Turntablism is the art of manipulating sounds and creating new music, sound effects, mixes and other creative sounds and beats, typically by using two or more turntables and a cross fader-equipped DJ mixer. The mixer is plugged into a PA system (for live events) and/or broadcasting equipment (if the DJ is performing on radio, TV or Internet radio) so that a wider audience can hear the turntablist's music. Turntablists typically manipulate records on a turntable by moving the record with their hand to cue the stylus to exact points on a record, and by touching or moving the platter or record to stop, slow down, speed up or, spin the record backwards, or moving the turntable platter back and forth (the popular rhythmic "scratching" effect which is a key part of hip hop music), all while using a DJ mixer's crossfader control and the mixer's gain and equalization controls to adjust the sound and level of each turntable. Turntablists typically use two or more turntables and headphones to cue up desired start points on different records (Greasley & Prior, 2013).
Turntablists, who are often called DJs (or "deejays"), generally prefer direct-drive turntables over belt-driven or other types, because the belt can be stretched or damaged by "scratching" and other turntable manipulation such as slowing down a record, whereas a direct drive turntable can be stopped, slowed down, or spun backwards without damaging the electric motor. The word turntablist is claimed to be originated by Luis "DJ Disk" Quintanilla (Primus, Herbie Hancock, Invisibl Skratch Piklz). After a phone conversation with Disk, it was later popularised in 1995 by DJ Babu to describe the difference between a DJ who simply plays and mixes records and one who performs by physically manipulating the records, stylus, turntables, turntable speed controls and mixer to produce new sounds. The new term coincided with the resurgence of hip-hop DJing in the 1990s. (Full article...)
The following are images from various radio-related articles on Wikipedia.
Image 1Animated diagram of a half-wave dipole antenna receiving a radio wave. The antenna consists of two metal rods connected to a receiver R. The electric field (E, green arrows) of the incoming wave pushes the electrons in the rods back and forth, charging the ends alternately positive (+) and negative (−). Since the length of the antenna is one half the wavelength of the wave, the oscillating field induces standing waves of voltage (V, represented by red band) and current in the rods. The oscillating currents (black arrows) flow down the transmission line and through the receiver (represented by the resistance R). (from Radio wave)
Image 2Diagram of the electric fields (E) and magnetic fields (H) of radio waves emitted by a monopole radio transmitting antenna (small dark vertical line in the center). The E and H fields are perpendicular, as implied by the phase diagram in the lower right. (from Radio wave)
Image 3In the 1920s, the United States government publication, "Construction and Operation of a Simple Homemade Radio Receiving Outfit", showed how almost any person handy with simple tools could a build an effective crystal radio receiver. (from History of radio)
Image 6Animation of a half-wave dipoleantenna radiating radio waves, showing the electric field lines. The antenna in the center is two vertical metal rods connected to a radio transmitter (not shown). The transmitter applies an alternating electric current to the rods, which charges them alternately positive (+) and negative (−). Loops of electric field leave the antenna and travel away at the speed of light; these are the radio waves. In this animation the action is shown slowed down tremendously. (from Radio wave)
Image 10Reginald Fessenden (around 1906) (from History of radio)
Image 11Radio communication. Information such as sound is converted by a transducer such as a microphone to an electrical signal, which modulates a radio wave produced by the transmitter. A receiver intercepts the radio wave and extracts the information-bearing modulation signal, which is converted back to a human usable form with another transducer such as a loudspeaker. (from Radio)
Image 12Comparison of AM and FM modulated radio waves (from Radio)
Image 13Around 1920, radio broadcasting started to get popular. The Brox Sisters, a popular singing group, gathered around the radio at the time. (from History of radio)
Image 17Frequency spectrum of a typical modulated AM or FM radio signal. It consists of a component C at the carrier wave frequency with the information (modulation) contained in two narrow bands of frequencies called sidebands (SB) just above and below the carrier frequency. (from Radio)
Image 18Donald Manson working as an employee of the Marconi Company (England, 1906) (from History of radio)
Image 19Motorola SCR-536 from WW2, the first walkie-talkie (from Radio)
Image 20Rotating marine radar antenna on a ship (from Radio)
Image 25Oliver Lodge's 1894 lectures on Hertz demonstrated how to transmit and detect radio waves. (from History of radio)
Image 26British Post Office engineers inspect Guglielmo Marconi's wireless telegraphy (radio) equipment in 1897. (from History of radio)
Image 27Advertisement placed on November 5, 1919, Nieuwe Rotterdamsche Courant announcing PCGG's debut broadcast scheduled for the next evening (from Radio broadcasting)
RadioDecember 12, 2006 "...to create, expand, and maintain Wikipedia articles related to radio, including radio propagation and reception, radio programming, radio personalities, and the business of radio." (Example: Mutual Broadcasting System)
Radio StationsFebruary 15, 2005 "...to coordinate the activities of creating and maintaining articles about radio stations." (Example: Pulse FM Kingborough & Huon)
PodcastingJanuary 21, 2007 "...to make Wikipedia's knowledge of notable Podcast and podcast-related information as complete as possible." (Example: Podcast)
Amateur Radio(Inactive), August 24, 2006 "...to improve Wikipedia's articles related to Amateur radio, maintain the amateur radio category and its sub-categories for clean organization, and to produce and maintain templates for Amateur radio-related topic identification." (Example: Amateur radio)
Associated Wikimedia
The following Wikimedia Foundation sister projects provide more on this subject: